Top 5 Types of Lock Replacements Available On the Market Today!

Different locks are made for different types of doors. You can’t just look at a lock and hope it’ll work for your door! Each lock comes with its requirements and it’s important that you’re fulfilling those requirements before you can have it attached to your door! Below are 5 of the most popular lock replacements you can find in the market today!

#1: Traditional Locks 
Traditional locks are the ones we’re already familiar with. These are the cylindrical locks we’ve seen be used for decades and they’ve survived because they do work very well. The lock has a cylindrical shell and can only be opened with a matching key. This type of lock is the easiest one to replace! If yours tends to give you any trouble, simply swap the lock for another one! Since these aren’t permanently installed you can just discard the old one and start using the new one instantly!

#2: Mortise Handle Locks
Mortise handle locks are one of the strongest locks available in the markets today. These are used in both homes, and commercial buildings and are very reliable. If the current lock on your door isn’t the strongest, it might be a good idea to up the security by going with a lock like this instead! This one has a regular door lever along with a deadbolt lock. So it’ll look like a regular door handle but is one of the strongest locks you can get today!

#3: Panic Bars 
Panic Bars may not seem like a lock, because it’s a bar, but it is. These are usually the giant bars you see on commercial buildings and hospitals that you have to push onto to unlock. Unless the bar is pushed from the inside, the door is virtually unfazed by anything trying to break in! This is also a great option to use for emergency exit doors, as that’s what it was made for, so in case there is an emergency, the people trying to exit the building won’t have to figure out how the lock works, just push the bar and the door opens instantly!

#4: Smart Locks 
Smart Locks are the most popular lock replacement upgrade that’s come around in the past few years. These are locks that can be controlled through a mobile app or can be programmed to work a certain way. Some of these feature a keypad, while others can even be unlocked using a pre-programmed fingerprint to make entry even easier! These come in the shape of traditional padlocks, and can be installed on your door too! If you’re trying to figure out which type of smart lock would be the best for your door, call over a Locksmith in Chicago or one in your area to come in and take a look at the door. They’ll be able to recommend the right lock and will even be able to install it for you!

Well here’s how you can factory reset Schlage Smart Lock Deadbolts and make the most of it in no time. 

Before Performing a Factory Reset on a Schlage Smart Lock Deadbolt

Before performing a factory reset on a Schlage Smart Lock Deadbolt, you need to first understand when are the times when it becomes mandatory for a person to perform a factory reset on a Schlage smart lock. To give you a better insight, here are some of the times when factory resetting the deadbolt becomes mandatory. 

• When you move the lock from one door at your residence to another door. Here, you may want to restore your smart lock to default settings so you can reconfigure the lock all over again on the new door. 
• When you’re moving house and you don’t want to leave your Schlage smart lock deadbolt behind. You need to restore the lock to its default settings and then reconfigure once you reinstall it at your new home. 
• If you’re setting up your new Schlage smart lock using a Homekit and you want to add the lock to one of your Android. You will have to restore the lock back to its default setting to pair it with Android. 
• If you’ve forgotten the code on your smart lock and you’ve no other way then to restore it to the default. 

When factory resetting a smart lock, remember that resetting the smart lock will erase all its previous codes. Contact any Atlanta locksmith and they will describe how you can reset the lock by bringing it back to its local lock settings and restore the factory codes. 

How to Perform Factory Reset on Schlage Smart Lock? 

Most Schlage smart lock deadbolts come with their own smart apps. The first way to perform factory reset on your Schlage lock is to use the app to delete the lock information. This will automatically reset the smart lock back to its old factory default settings. If the process of deletion is successful and the app restores the smart deadlock back to its original settings, the app will flash a green check mark. 

There’s also a manual way of resetting a Schlage smart lock which is as follows: 

• Disconnect the batteries from the Schlage smart lock 
• Now press & hold the outside schlage button 
• When you’re holding the button, simply reconnect the batteries 
• Once the battery is connected, release the outside button 
• To confirm whether the lock was successfully reset or not, enter the default access code
• If the lock works on the default access code, it indicates it has been resetted 

And that’s just about it. Your smart deadbolt has successfully resetted to its original settings. You can now reuse them wherever you want, however you want. You can even add new access codes as per your preference. Did you find this information helpful? Let us know what you think by leaving a comment. 

While some people treat the holiday season as the goldmine of shopping, others take it as a ticket to steal anything they can. Hence, store owners must take some precautionary measures to secure their store.

Here are some tips to secure your store from thefts:

1.   Motion Detection

Apart from daily activities, it would help if you improve your security during the holiday season. The motion detection algorithm can prevent break-ins. Understand how the technology works and monitor the unknown motion during the operating hours.

There are areas in the store that are restricted to customers. When a customer enters that section, motion detection algorithms must send alerts to the store manager. Moreover, motion detection must be applied on the shelves.

The camera, upon detecting the motion, will trigger anything suspicious. The algorithms can be simple or complex, depending upon the security level you want in each section.

The basic operation of motion detection is detecting a motion on a fixed background. But the detection can be customized to detect human movement based-upon heat mapping technology.

A cloud video management software can alter the store manager regarding any activity and call the police for assistance.

2.   Queue Management

On holidays most of the thefts occur in crowded spaces. Queues can help to an extent, but in reality, these queues must be managed as well. For elderly customers, proper queue management can reduce the risk of a theft.

A managed queue can easily be monitored via a camera. Whenever a queue reaches the threshold, customers can be requested to rearrange the queue. Or the store manager can assign more people serving the customers and reducing the queue. 

3.   Face Recognition

The holiday season can bring repeat offenders into action. Using face recognition software can capture and trigger any repeat offenders, keeping them away from the premises before they create any problem in the store.

The facial recognition software will recognize the repeat offenders, and before they even try to do anything, they’ll be thrown out of the store. The alert can be sent to the store manager or anyone from the store.

4.   Improve the locking mechanism

More than half of the holiday thefts can be prevented by using an advanced locking mechanism.

Instead of keys, try to use pin codes for the locks. You can also consult an expert like a locksmith in Brooklyn to help you decide the quality of the lock that will be best suited for your store.

For more security, double the locks with external doors that will add a layer of extra security.

5.   POS Cameras

In the holiday season, stores often place attractive offers at their doors. However, when there are coupons and discounts involved, it increases the chances of a fraud. A coupon modification or reusing the same coupon, which can be done by perusing the store clerks.

To avoid such frauds, POS cameras are the only solution. The cameras will monitor every movement, whether it is a clerk, customer, or anyone suspicious trying to steal something.

Some cameras come with a video analytics feature, which means you can add more features to a simple video feed. Features like night vision, extra zoom, or real-time alerts can be purchased by asking the video service provider company.

Conclusion

The holiday season is the most anticipated season of the year. While most people look out for discounted products, some people take this as an opportunity to steal whatever they can.

But the theft can easily be reduced if you apply the tips mentioned above. They might sound simple, but these simple tips can help you monitor your store without allocating extra resources. Everything will be recorded, and with anything suspicious, you’ll be sent an alert.